概述
Zduino Ethernet是基于Arduino Ethernet的微控制器板，我们在官方原作基础上，集成了USB下载、POE供电、TF插槽等功能，并且完全兼容UNO引脚位置。使用它，你可以快速的将你的控制器接入互联网从而搭建你的网络应用。
-
摘要
使用方法,见相关文档中数据手册
-
相关文档
-
驱动程序
-
mac: Mac_OSX_VCP_Driver
- Liunx:cp210x-3.1.0.tar
- windows:Zduino-cp210x-VCP-Windows
发表评论
智能盒子oj
开源硬件与无限创想
Zduino Ethernet V2（Arduino Ethernet兼容控制器）
你在这里：
Dear Srs,.. I have a Zduino ethernet v2.5,.. with 32k flash ram,.. when I compiled any sketch above 20k it seems reset continuously or not initialize correctly ,. Can I load a 32k program up to ? or is there any limit?
Best regards.
do you use watchdog? Maybe ,your code have error,could you send your code to our Email(support@openjumper.com)
I have just received the Zduino E v2.5 and I have tried to download a sketch by the USB port but it is not recognized by the computer.
I have tried to download the datasheet and the link it is not available. If it is not possible to program it with the microUSB port, how can I do it? Because it does not have a FTDI port. Thank you very much, best regards
zduino ethernet use cp2102 as the chip that usb to serial，you can download the driver：
Windows:Zduino-cp210x-VCP-Windows
Linux:cp210x-3.1.0.tar
Mac:Mac_OSX_VCP_Driver